optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 1 SPM-9100VG (rohs compliant) 850 nm / 3 gb/s multi-mode video sfp transceiver ********************************************************************************************************************************************************************** features l smpte 297-2006 compatible l hot-pluggable sfp footprint lc optical transceiver l small form-factor pluggable (sfp) msa compatible l speed from 50 mbps to 3gbps with up to 1000 m multi-mode fiber l distance up to 300 m for 3g-sdi l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the SPM-9100VG is a multi-mode transceiver module designed to transmit/receive optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for transmitted the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. it is with 850 nmvcsel transmitters. the transmitter can transmit signal from 50 mbps to 3 gbps with up to 1000 m of multi-mode fiber. a maximum distance of 300 m is achievable with 3gbps pathological signals. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx rx p/no. type bit rate (mb/s) (nm) power (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant SPM-9100VG trx 50 to 3000 850 -2 to -7 850 0 to -15 lc sfp 0 to 70 yes link distance sdi bit rate max. link distance (m) 3g-sdi 2.97gbps 300 hd-sdi 1.485gbps 500 sd-sdi 270mbos 1,000
optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 150 200 ma transmitter specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -7 -2 dbm 1 output center wavelength l 830 850 860 nm output spectrum width dl --- 1 nm rms ( ) extinction ratio er 5 7.5 db relative intensity noise rin -118 db/hz 135 ps 2, smpte 424m 270 ps 2, smpte 292m 800 ps 2, smpte 344m optical rise time / fall time tr / tf 1.5 ns 2, smpte 259m electrical differential input voltage v ih - v il 200 1200 mvp-p ac coupled input disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h 2.0 vcc+0.3 v tx ouput disabled v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. output power is power coupled into a 9/125 m m single mode fiber. 2. 20% to 80%, unfiltered. receiver specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical wavelength of operation 780 --- 880 nm 0 --- -15 dbm pathological sensitivity for smpte 424m 2.97 gb/s sen 0 -15 dbm prbs 2 23 -1, ber=1e-12 0 --- -16 dbm pathological sensitivity for smpte 292m 1.485 gb/s sen 0 -16 dbm prbs 2 23 -1, ber=1e-12 signal detect -- asserted pa --- --- -16 dbm transition: low to high signal detect -- deasserted pd -28 --- --- dbm transition: high to low signal detect -- hysteresis 1 6 db electrical cml output (differential) 550 660 850 mvp-p ac coupled output optical rise time / fall time tr / tf 135 ps 3, smpte 424m
optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 3 270 ps 3, smpte 292m 800 ps 3, smpte 344m 1.5 ns 3, smpte 259m output los voltage -- low v ol 0 0.5 v i ol =-1.6ma, 1 ttl unit load output los voltage -- high v oh 2.5 vcc+0.3 v i oh =40 m a, 1 ttl unit load v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 3. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 4 connection diagram pin signal name description pin signal name description 1 tx gnd transmitter ground 11 rx gnd receiver ground 2 tx fault transmitter fault indication 12 rx data out- inverse receiver data out 3 tx disable transmitter disable (module disables on high or open) 13 rx data out+ receiver data out 4 mod-dfe2 modulation definition 2 C two wires serial id interface 14 rx gnd receiver ground 5 mod-def1 modulation definition 1 C two wires serial id interface 15 vcc rx receiver power C 3.3v 5% 6 mod-def0 modulation definition 0 C ground in module 16 vcc tx transmitter power C 3.3v 5% 7 n/c not connected 17 tx gnd transmitter ground 8 los loss of signal 18 tx data in+ transmitter data in 9 rx gnd receiver ground 19 tx data in- inverse transmitter data in 10 rx gnd receiver ground 20 tx gnd transmitter ground module definition module definition mod-def2 pin 4 mod-def1 pin 5 mod-def0 pin 6 interpretation by host 4 sda scl lv-ttl low serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, mod-def(1:2) appear as no connector (nc) and mod-def(0) is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 5 recommended circuit schematic 100nf 10 f 100nf 10 f veer post amp ld driver z=50 z=50 z=50 z=50 veet 1 h 1 h td - td + vcct vccr rd - rd + 100 sfp module los 100nf 10 f protocol eeprom module detect scl sda loss of singal tx_disable tx_fault mod_def(0) mod_def(1) mod_def(2) 4.7k to 10k 4.7k to 10k 4.7k to 10k 4.7k to 10k tx_fault tx_disable (1,17,20) 3 2 18 19 16 15 12 13 8 (9,10,11,14) 6 5 4 4.7k to 10k vcc 3.3v vcc 3.3v ic td + td - re-clocker rd - rd + re-clocker package diagram units in mm note: specifications subject to change without notice.
optoway SPM-9100VG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 6 revision history version subject release date 1.0 initial datasheet 2008/11/1
|
